Kawasaki Hydraulic Pump Parts Removal And Installation Method

After the hydraulic pump is used for a long time, there will always be various problems, some problems are difficult to solve, and it is necessary to replace the new hydraulic pump, but most of the problems encountered in our operation can actually be solved by replacing damaged related parts. Below Elephant Fluid Power will take kawasaki hydraulic pump as an example to introduce you to the removal and installation of hydraulic pump accessories.

1. What is the dismantling process of Kawasaki Hydraulic Pump?

(1) First use the inner hexagonal wrench to loosen the 6 fastening bolts in a symmetrical position, then remove the bolts, remove the positioning pin, lift the front pump cover, observe the unloading groove, oil suction chamber, pressure oil chamber and other structures, clarify their functions, and analyze the working principle.

(2) Take out the active gear and shaft, driven gear and shaft from the pump body.

(3) Decompose end cover and bearing, gear and shaft, end cover and oil seal.

2. The installation process of Kawasaki Hydraulic Pump

The installation of hydraulic press components is a highly practical technical work, and the correct installation is an important part of realizing and ensuring the normal operation of the system, so it must be paid full attention. Among them, whether the installation and use of the axial piston pump is correct directly affects the service life of the pump and the normal operation of the machine. Correct installation methods and steps are an important way to ensure the normal operation of the hydraulic press and improve the efficiency of the machine, and must be given sufficient attention. Therefore, when installing the hydraulic pump, it must be used correctly in accordance with the following requirements.

(1) The hydraulic pump can be installed with a support or flange, the pump and motor should adopt a common foundation support, the flange and foundation should have sufficient rigidity to avoid vibration when the oil pump is running, for the flow rate greater than (or equal to) 160L/min oil pump, due to the large motor power, should avoid installing on the oil tank.

(2) The installation method of the transmission shaft of the pump and the output shaft of the motor is as follows:

A. Support installation.

B. Flange installation: In this installation form, if the coupling connection is adopted between the motor and the pump.

(3) The flexible coupling must be used between the pump and the motor transmission shaft, because the pump transmission shaft can not withstand the bending moment, so it is strictly forbidden to directly install the pulley or gear drive oil pump on the shaft of the pump, if it is necessary to use a pulley or gear, you must add a bracket to install the pulley or gear.

4) The direction of rotation of the pump, according to the sign of the pump, if the direction of rotation is not indicated when ordering, it should be rotated clockwise (from the shaft end).

(5) The installation of the oil pump should take into account the convenience of maintenance, so that the variable housing is easy to remove, and it is convenient to take out the cylinder block and oil distribution plate in the pump.

Correct installation methods and steps are an important way to ensure the normal operation of the hydraulic press and improve the efficiency of the machine. Therefore, it must be given sufficient attention.

kawasaki hydraulic pump parts is a precision device, it is easy to cause secondary damage to the product during the disassembly process, affecting the subsequent use of the product, if you lack relevant knowledge, then a better solution is to contact a professional for repair.

Elephant Fluid Power not only manufactures and sells a large number of kawasaki hydraulic pumps, but all of these products come with a one-year warranty, Elephant Fluid Power is responsible for the quality of the products, during which any problems with the products will be solved by the company and provide you with technical support. When you buy Elephant Fluid Power's products, you don't have to worry about the quality of the products in the subsequent use, because their after-sales service is thoughtful and meticulous, which can definitely meet your needs.

As a manufacturing company with rich production experience, Elephant Fluid Power produces generally high product quality, few quality problems, and affordable price and good after-sales service. If you have a related need, contact them quickly!

kawasaki pumps catalogue

kawasaki hydraulic pump distributors

kawasaki hydraulic pump usa

kawasaki hydraulic pump distributors canada

kawasaki hydraulic pump repair manual

kawasaki hydraulics distributors

kawasaki hydraulic pump repair

kawasaki hydraulics usa